Menu
Cart 0

How to Dry Your Home After Floods?

As a homeowner, there are a few thing things that can cause you a lot of distress and damage a lot of your property, and floods are one of them.

What can cause floods?

  • Heavy continuous rainfall.
  • Burst pipes causing draining lots of water indoors.
  • Sewer back-up.
  • Rising water table causing water to settle on the ground floor.
  • Overflowing sinks and bathtubs.

There can be numerous causes of floods, however, the most important fact to know is the earlier you take care of the problem, you can reduce the amount of damage by over 50% and make clean up and repairs easy.

Before you begin any flood repair in your home, first consult your insurance company about all the available dry options you are allowed to use without invalidation your insurance claim.

In this post, we are going to provide yours with a comprehensive guide on a recommendation on how dry your home after floods. This guide is provided by our elite group of water damage and restoration experts.

1. Stay safe!

In any flooding incident, the safety of anyone in the house should always be the first priority. If the flooding is increasing you may have temporary leave your home. Turning off power should be the very first measure you implement – it goes with saying water and electricity can be a lethal combination. We don’t want anyone getting electrocuted. Wear protective rubber boots and gloves as you enter the house so as to shut down the power at the main switchboard.

If the flooding is as a cause of a burst pipe or overflowing sink turn off the water and the main supply gauge. If the flood gets into contact with any food – it should be thrown away, while all silverware and glasses used to be washed thoroughly.

2. Pump the water out.

Once you are sure the source of the water has been stopped or install a sump pump to stop the rising water from coming into the home’s basement, crawlspace, garage, and the floor. This will help stop the flooding.

When the flooding is caused by a burst pipe, once you turn off the water fix the plumbing as soon as possible. When the floods are caused by rainfall wait till the storm subsides to start removing the water.

Depending on the level of flooding and the number of rooms affected, you can use a lot of different methods to remove water including :

  • When you are lucky and the flooding is minimal then use a mop to clean the water.
  • Using bins and buckets.
  • Use a pump and a hose to drain – if their water level is high, especially if underground spaces like basements or crawls spaces are completely submerged by water.
  • Use a wet vacuum to suck the water in carpets and furniture.

3. Damp assessment.

Once you clear all the standing water on the floors, everything in the house will still be damp and wet. You can use a thermal imaging camera to determine the moisture extent. You can use air conditioning and Alorair Zeus Extreme Axial air mover to help dry the moisture.

Invest in a dehumidifier – while using a fan to increase air circulation in the house aiding in drying, it is not as effective as using a dehumidifier. A dehumidifier is an electrical appliance that removes excess moisture from the air.

Once the air is processed by a dehumidifier it will be warmer and have low humidity level as this air circulated in the rooms through the damp items. This will prompt moisture from this damp items into the air. This saturated air will then be pulled into the dehumidifier and the process will be repeated until the dampness is completely eradicated. This is the easiest way to minimize the potential water damage.

A dehumidifier is also a must-have appliance for anyone living in damp wet climates or place that experience a lot of rainfall throughout the year. Alorair dehumidifiers will protect you from indoor mold and mildew growth and decrease number of a dust mite. This will make a home feel warmer, more comfortable and reduce allergies and asthma attacks.

4. Stripping out.

While alorair dehumidifiers could reduce the dampness, if the flood levels were high then you might have to remove extremely saturated insulation,  parts of plasterboard(walls and ceilings), remove a wall to wall carpets or any other floor covering.

Remove any impervious materials that may be baring evaporation of moisture trapped in items, walls or roof. Remove anything you deem not cost effective to dry. This ensures your home’s structure is easy to dry.

5. Disinfecting & Cleaning.

You should clean out and sanitize the area that is to be dried but came in contact with the flood water. This is important especially if the flood water was grey or black. Grey flood water is wastewater generated from domestic activities like showering or dishwashing, while black water is wastewater containing human waste or toilet discharge.

It is therefore important to spray a disinfectant on the space where the flood water was. To avoid people getting sick.

6. Drying your space.

During the first week after flooding, it is important you be very proactive in drying out the flooded space. It does not matter the magnitude of the flooding, water can penetrate deep into the building structure and household items in a short amount of time.

To remove a lot of moisture fast you need high capacity refrigerated dehumidifiers with the continuous drainage option and low-temperature dehumidification. This dehumidifier should be combined with industrial fans to help in air circulation and increase dehumidifiers effectiveness.

If the flooding occurred in a large size home – it is best to hire water damage and restoration expert to provide you with the drying techniques for your needs. They will also provide you with exact measures of your dehumidification requirements.

7. Reconstruction and repairs.

Your insurer is responsible for any building work. After a flood, you might be required to repair the house plumbing, flooring, decoration, plastering, tiling, and electrical wiring. Most insurance policies will pay the full cost of repairs as long as the repairs don’t exceed the sum insured by the policy. If the cost of repairs is higher than the sum insured you will have to pay the additional sum.

If your flooding problem was caused by natural causes like too much rainfall it is important you consider improving the home’s resistance and resilience to any possible future flooding.

Crawl Space & Basement Dehumidifiers

Explore top-rated commercial dehumidifiers for a dry, mold-free basement and crawl space!

Shop Now

Featured Proudcts

ALORAIR Combo Pack for Water Damage Restoration 1xStorm LGR Extreme Commercial Dehumidifier, 6xZeus 900 Air Movers and 1xHEPA 550 Air Scrubber

ALORAIR Combo Pack for Water Damage Restoration 1xStorm LGR Extreme Commercial Dehumidifier, 6xZeus 900 Air Movers and 1xHEPA 550 Air Scrubber

$3,186.00

Learn More
Alorair® Commercial Water Damage Restoration Equipment, 1 x Dehumidifier, 2 x Air Mover and 1 x Scrubber Combo Pack for Air Cleaner | Storm Pro & Zeus 900 & CleanShield HEPA 550

Alorair® Commercial Water Damage Restoration Equipment, 1 x Dehumidifier, 2 x Air Mover and 1 x Scrubber Combo Pack for Air Cleaner | Storm Pro & Zeus 900 & CleanShield HEPA 550

$1,847.99

Learn More

Share this post

Storm LGR Dehumidifier

What Happens If You Lay a Dehumidifier on Its Side?

Dehumidifiers are designed to maintain comfortable and healthy indoor environments by reducing excess humidity. However, laying a dehumidifier on its side can cause significant problems. These appliances are built to operate in an upright position, and tilting or placing them on their side disrupts their functionality. To ensure a dehumidifier works properly and to avoid unnecessary damage, understanding what happens when it is laid on its side is essential. For reliable dehumidifiers, check out Alorair for top-quality models. Why Should a Dehumidifier Not Be Laid on Its Side? Dehumidifiers contain delicate internal components that are precisely aligned to function efficiently. Laying the unit on its side can disrupt or damage these components. The compressor, refrigerant system, coils, and water tank are all designed for upright operation. Shifting the unit can result in mechanical failures, leaks, or other malfunctions. To ensure durability, consider using the Storm LGR Dehumidifier for demanding environments like large basements and job sites. Common Issues That Occur When a Dehumidifier Is Laid on Its Side When a dehumidifier is not kept upright, several issues can arise, causing short-term and long-term problems. These include: The compressor oil may flow into the refrigerant lines. The compressor requires oil to lubricate its internal components, but laying the unit on its side displaces this oil. When the oil enters the refrigerant lines, it can block the system or damage the compressor. This can lead to a loss of functionality or costly repairs. The refrigerant inside the dehumidifier may not circulate correctly. A dehumidifier uses a closed refrigerant system to absorb and release heat, which enables it to extract moisture from the air. Tilting the unit disrupts the circulation of refrigerant, reducing the dehumidifier’s efficiency. In extreme cases, the refrigerant lines can be damaged, causing leaks or system failure. Alorair Commercial Dehumidifiers are built for continuous and efficient moisture removal even in complex spaces like crawl spaces. The coils and other internal components are at risk of damage. Evaporator coils and condenser coils are essential for the dehumidification process. These components are sensitive to movement, and laying the unit on its side can cause bending, cracking, or misalignment. Even minor damage can reduce performance or prevent the unit from working altogether. For high-performance results. Residual water in the reservoir or internal parts can spill into the unit. If water is present in the tank or reservoir, placing the dehumidifier on its side may cause it to leak. This not only creates a mess but also risks damaging electrical components inside the unit. Water leaks can also cause mold growth if not cleaned promptly. The dehumidifier may not start or function correctly after being tilted. Even if there is no visible damage, the compressor and refrigerant need time to settle back into place. If you try to start the dehumidifier immediately after laying it on its side, it may fail to work properly. This is because the internal systems are not in the correct position to operate efficiently. For consistent and reliable performance, Wholesale of Storm Ultra Dehumidifiers are available for bulk purchases, ensuring you have the right equipment for any project. What to Do If You Have Laid a Dehumidifier on Its Side If you accidentally lay your dehumidifier on its side, there are steps you can take to minimize potential damage and get it working again. The key is to act promptly and allow the unit to reset before attempting to use it. Return the dehumidifier to an upright position as soon as possible. Keeping it upright ensures that oil and refrigerant can begin settling back into their proper places. The sooner the unit is returned to its correct position, the lower the risk of internal damage. Let the dehumidifier sit upright for at least 24 hours. This resting period allows the compressor oil and refrigerant to return to their proper positions. Waiting ensures that the unit will be safe to operate without risking further damage to its internal components. For your next dehumidification project, the Wi-Fi Industrial Dehumidifier for smart, connected control. Inspect the unit for visible damage or leaks. Check for any water that may have spilled during transport. Look for cracks, bent components, or water stains. If you notice any damage, do not turn on the unit. Instead, consult a professional technician for a thorough inspection and repair. A trusted product the Commercial Dehumidifiers for Garage will help avoid any hassle during handling. After waiting 24 hours, restart the dehumidifier. Plug the unit back in and turn it on. Monitor its performance to ensure it is working correctly. If the unit does not start or functions improperly, it may require professional servicing. How to Prevent Damage When Handling a Dehumidifier To keep your dehumidifier in optimal condition, it is important to follow proper handling guidelines. Always move and store the unit in an upright position. Dehumidifiers are not designed to be tilted or laid flat, so keeping them upright minimizes the risk of internal damage. If you need to transport the unit, secure it carefully in a way that maintains its position. To make sure your dehumidifier performs effectively, pair it with the HEPA Max 870 Air Scrubber for enhanced air quality and moisture control. Empty the water reservoir before moving the dehumidifier. Water left in the tank can spill during transport, leading to leaks and internal damage. Draining the reservoir before moving the unit helps avoid this problem. A durable and efficient for managing air circulation during such tasks is the CFM Ventilation Fan. Store the dehumidifier in a dry, upright position when not in use. If the unit will be stored for an extended period, ensure it is completely dry to prevent mold growth or moisture damage. Following the manufacturer’s handling and storage instructions can help prolong the lifespan of the unit. For home use, the Dehumidifier for Home is an excellent option for maintaining indoor air quality and reducing humidity. Can Laying a Dehumidifier on Its Side Void the Warranty? Yes, laying a dehumidifier on its side could potentially void the warranty, especially if the damage caused affects the internal components, such as the compressor or refrigerant system. Manufacturers typically expect the unit to be used according to the guidelines in the user manual, and improper handling can lead to warranty issues. Always refer to the Thedryair Warranty Policy for more details on product usage and coverage. Conclusion Laying a dehumidifier on its side can cause significant damage to its internal components, including the compressor, refrigerant system, and coils. This improper positioning can result in oil displacement, disrupted refrigerant flow, water leaks, and startup failures. If a dehumidifier has been placed on its side, returning it to an upright position and allowing it to settle for at least 24 hours can help minimize damage. Proper handling and storage practices are essential to ensure the unit functions efficiently and remains in good working condition. 
mold air purifier

Are Dehumidifiers Good For Grow Tents?

Grow tents are becoming increasingly popular for indoor gardening, providing controlled environments for plants that require specific humidity, temperature, and light conditions. One common question among indoor gardeners is whether dehumidifiers are necessary or beneficial for growing tents. Yes, dehumidifiers are beneficial for growing tents as they help control humidity, preventing mold and mildew growth.  We will explain in this article, the importance of humidity control, how dehumidifiers function, and how they can improve plant health and growth in grow tents. To enhance air quality and prevent mold, consider using a mold air purifier in your growing space. Why Is Humidity Control Important In A Grow Tent? Humidity plays a significant role in the health and growth of plants. A grow tent environment can fluctuate in terms of humidity due to several factors, such as watering frequency, grow light intensity, and the type of plants being cultivated. Excessive humidity can create an environment conducive to the growth of mold, mildew, and other fungal infections.  On the other hand, too little humidity can stress plants and hinder their growth. In either case, managing humidity levels is essential for a stable and healthy growing environment. A dehumidifier can help regulate these levels, ensuring the best conditions for plants at different stages of their growth cycle. Pairing it with an air scrubber for sale can further enhance air circulation and cleanliness. What Is The Role Of A Dehumidifier In A Grow Tent? Dehumidifiers are devices designed to remove excess moisture from the air. By reducing humidity levels, they can help create an optimal environment for plant growth. Dehumidifiers work by drawing humid air into the machine, where the moisture is condensed and removed. The dry air is then expelled back into the room, maintaining a balanced humidity level. Adding a carbon filter to the system can help eliminate any unwanted odors in the grow tent, ensuring a fresh atmosphere. How Can A Dehumidifier Benefit A Grow Tent? The benefits of using a dehumidifier in a grow tent are numerous and essential for plant health. Firstly, a dehumidifier helps prevent the growth of mold and mildew. Mold thrives in high humidity environments, and indoor gardens are no exception. When humidity levels exceed the optimal range, mold spores can quickly spread and damage the plants. By reducing moisture in the air, a dehumidifier can help prevent mold, mildew, and other fungal diseases, ensuring that the plants stay healthy and free from harmful pathogens. Additionally, integrating an air scrubber filter can trap airborne pollutants that may negatively impact your plants. Additionally, a dehumidifier helps improve air circulation in the grow tent. With excess moisture removed from the air, the environment becomes less humid, allowing for better airflow. This is particularly important for plants, as they rely on proper air circulation to facilitate vital processes like photosynthesis and respiration. Improved air circulation also ensures that the plants receive a steady supply of oxygen, further supporting their growth and development. By using an air purifier for smoke, you can also ensure that smoke or other airborne contaminants do not interfere with the plant’s needs. Another significant benefit of a dehumidifier is that it reduces the risk of overwatering. Overwatering is a common issue in indoor gardening, and it can cause excess moisture to build up in the grow tent. This can raise the humidity levels inside, leading to root rot and plant stress. By using a dehumidifier, excess moisture is removed, helping to keep the humidity levels in check and reducing the likelihood of problems associated with overwatering. For even better air quality, use a whole house air purifier in the space. Dehumidifiers also help optimize growth conditions by maintaining the ideal humidity levels. Different plants have different humidity requirements, and dehumidifiers allow for precise control over the environment. For most plants, relative humidity levels should be between 40-60%. A dehumidifier helps maintain these levels, promoting faster and healthier plant growth. By stabilizing humidity, a dehumidifier ensures that plants are able to absorb water efficiently, avoiding dehydration or excessive moisture retention. This process is further enhanced with the use of an air purifier for mold, which helps keep the space free from airborne allergens. Moreover, a dehumidifier can help with temperature control in the grow tent. High humidity can make a space feel warmer than it actually is, which may cause problems for plants that require a specific temperature range. By reducing moisture levels, a dehumidifier can help regulate the temperature inside the tent, creating a more comfortable environment for the plants and improving their overall health. For improves the air quality by using the best air purifier for mold to keep the environment pristine. When Should You Use A Dehumidifier In A Grow Tent? There are several instances when using a dehumidifier in a grow tent is highly beneficial. If you live in an area with high ambient humidity, a dehumidifier is essential to help regulate the moisture levels inside the tent. High humidity levels can promote the growth of mold and mildew, so it's crucial to remove excess moisture from the air. Pairing this with a best air purifier for pets can help maintain a healthy environment for both plants and pets in the same space. The flowering stage of many plants is another critical time when dehumidifiers can be helpful. During this stage, plants tend to release more moisture into the air through transpiration. If humidity levels become too high during flowering, the risk of mold and mildew increases significantly. A dehumidifier can help maintain the ideal humidity levels during this time, ensuring that the plants stay healthy and their flowers develop properly. To ensure the space remains free of contaminants, using a homedics air purifier can further help manage the air quality. Overwatering is a common issue in indoor gardening, especially for beginners. If you have accidentally overwatered your plants, a dehumidifier can help remove excess moisture from the air, restoring the balance in the grow tent. It also helps prevent root rot, which is a common problem caused by excess water in the soil. Adding an air purifier for smoke smell to your setup can help eliminate any lingering odors that may arise from overwatering. Are There Any Downsides To Using A Dehumidifier? While dehumidifiers provide many benefits, there are a few potential downsides to consider. One of the most important factors to monitor is the humidity level. If a dehumidifier is overused or set to remove too much moisture, it can lead to overly dry conditions in the grow tent. This can stress the plants and lead to dehydration, which can stunt their growth. To avoid this, it's important to maintain the right balance with a medical grade air purifier. Another potential issue with dehumidifiers is that they may slightly increase the temperature inside the grow tent. Some dehumidifiers generate heat as part of the condensation process, and this can raise the temperature if the grow tent is not properly ventilated. It's important to ensure that the grow tent has adequate airflow and temperature control to avoid overheating the plants. An air purifiers for smokers can also help maintain air quality during such conditions. How To Choose The Right Dehumidifier For A Grow Tent? When selecting a dehumidifier for your grow tent, it's essential to choose one that suits the size of your space. Smaller tents require a less powerful model, while larger tents may need a more robust dehumidifier to handle the higher moisture levels. Consider the capacity of the dehumidifier to ensure that it can adequately remove moisture without over-drying the environment. For better efficiency, adding a portable air purifier can enhance air quality, ensuring a consistent environment for your plants. Conclusion In conclusion, dehumidifiers are an excellent tool for maintaining the ideal growing conditions in a grow tent. By regulating humidity levels, dehumidifiers help prevent mold and mildew growth, improve air circulation, reduce the risk of overwatering, and create an optimal environment for plant health. However, it is crucial to monitor humidity levels carefully to avoid over-drying the environment. With the right dehumidifier and proper maintenance, your grow tent can become a thriving space for healthy plants. Consider combining your dehumidifier with other air-purifying solutions, such as an air scrubber filter, for enhanced air quality.
HEPA Air Scrubber

How to Stop Mold in Pantry?

Mold in your pantry can quickly become a persistent issue, impacting your stored food and even the health of your household. To stop mold in your pantry, you need to address the root causes by controlling humidity, improving ventilation, and regularly cleaning the space. Use a dehumidifier to maintain low moisture levels, ensure proper airflow with ventilation fans or air scrubbers, and store food in airtight containers. Regularly inspect for leaks or spills and clean the shelves to eliminate mold spores.   This guide will walk you through proven strategies to stop mold in your pantry and keep your food safe and fresh. Steps to Prevent Mold in Your Pantry Maintain a Dry Environment Moisture is mold’s best friend, and keeping your pantry dry is the first step in preventing mold growth. Excess humidity or unnoticed water leaks can create the perfect environment for mold spores to flourish. Control humidity: Using an Alorair Dehumidifier can effectively maintain optimal humidity levels below 60%, creating a less hospitable environment for mold. Address water leaks: Inspect the pantry and nearby areas for leaks from plumbing or cracks in walls. Even small amounts of water can cause a mold outbreak. Improve ventilation: Ensure there’s adequate airflow in and around your pantry. If the area feels stuffy or enclosed, use a small fan or install a vent to reduce trapped moisture. Use Airtight Storage Containers Improper food storage is one of the most common causes of mold in pantries. Storing food in airtight containers not only prevents mold growth but also keeps pests away and extends the shelf life of dry goods. Invest in quality containers: Glass, BPA-free plastic, or stainless steel containers with tight-fitting lids are ideal for storing grains, cereals, flour, and snacks. You can use an HEPA Air Scrubber near the pantry to ensure clean air, further reducing mold risks. Keep baked goods fresh: Bread and baked goods tend to mold faster in humid conditions. Consider refrigerating or freezing them if your pantry tends to get warm. Label and organize: Clearly label containers with the purchase or expiry date. This helps you use older items first and prevents food from being forgotten and going bad. Regular Cleaning to Remove Mold Spores A clean pantry is less likely to harbor mold. Regularly cleaning and organizing the space can eliminate potential food sources for mold and remove any dormant spores. Schedule regular cleaning sessions: Wipe down pantry shelves, walls, and corners at least once a month using a natural mold deterrent, such as a solution of white vinegar and water. Vacuum and dust: Use Air Movers while cleaning to ensure all areas are free from debris and well-ventilated. Declutter frequently: Check for expired or spoiled food items and discard them immediately. Remove unnecessary packaging to reduce clutter and improve airflow on the shelves. Monitor and Control Humidity Levels High humidity is a significant contributor to mold problems, especially in regions with naturally damp climates. Keeping humidity levels in check can prevent mold from forming in the first place. Use a hygrometer: This affordable device will help you monitor the humidity in your pantry. Consider using a Hanging Air Filter to help maintain cleaner air in humid conditions. Install a dehumidifier: If humidity is consistently above 60%, a portable dehumidifier or Commercial Dehumidifier can make a big difference. Keep the pantry ventilated: Open the pantry door occasionally or consider adding vents to promote air circulation. If your kitchen traps heat and moisture, address the broader ventilation system. Inspect for Early Signs of Mold Regular inspections can help you catch mold before it becomes a bigger issue. Mold can grow in hidden areas, such as the back of shelves or in corners, so a thorough check is crucial. Look for visible mold: Check all surfaces, including walls, shelves, and even the ceiling. Smell for musty odors: If you detect a musty smell, use a Water Damage Restoration Combo to clean and sanitize the affected areas. Inspect stored items: Check food packages and containers for signs of contamination, such as discoloration or a moldy smell. If you discover mold, clean the affected area with a solution of bleach and water or a commercial mold remover. Ensure the area is thoroughly dried afterward to prevent recurrence. Keep the Pantry Cool Temperature plays a significant role in mold growth. Warm environments encourage mold spores to multiply, so maintaining a cooler temperature can prevent issues. Set the right temperature: Aim to keep your pantry between 50°F and 70°F for optimal food storage. Avoid heat sources: Keep your pantry away from ovens, dishwashers, or heating vents that could raise the temperature. Install cooling aids if needed: If your pantry tends to get warm, use Air Scrubbers Packs to regulate temperature and improve air quality. Organize Your Pantry for Better Maintenance An organized pantry is easier to maintain and inspect for potential mold issues. Take the time to structure your pantry to reduce clutter and improve accessibility. Use stackable containers: These maximize space and make it easier to see all stored items. Create zones: Group similar items, such as grains, canned goods, and spices, to avoid overcrowding and improve airflow. Consider sourcing storage solutions from Air Scrubber Wholesale suppliers to enhance organization. Rotate stock: Follow the “first in, first out” rule by placing older items at the front and newer ones at the back. Choose Mold-Resistant Materials for Shelving The type of shelving in your pantry can influence mold growth. Certain materials are more resistant to mold than others and can make a significant difference. Opt for metal or wire shelving: These materials are less prone to absorbing moisture compared to wood or particleboard. Crawl Space Dehumidifiers can also be placed nearby to reduce moisture in surrounding areas. Use mold-resistant paint: If your pantry has wooden shelves, coat them with mold-resistant paint or sealant to prevent moisture absorption. Elevate items off the floor: Store food items on raised shelves or racks to protect them from potential water damage. Improve Crawlspace and Garage Ventilation Adjacent spaces like crawlspaces and garages can contribute to moisture problems in your pantry. Improving their ventilation helps create a mold-free environment overall. Use Crawlspace Ventilation Fans to improve air circulation in crawlspaces. This prevents moisture buildup that could seep into your pantry. Dehumidifiers for Garages are effective in preventing mold from forming in garages, which can indirectly affect nearby pantry spaces. Maintain airflow: Keep vents clean and free from obstructions. Address Fire or Water Damage Fire and water damage can introduce moisture and contaminants into your pantry. Acting quickly can prevent long-term mold issues. Post-fire cleaning: Products like Alorair Fire and Smoke cleanup tools are excellent for removing odors and mold spores after fire damage. Water damage restoration: Use a Water Damage Air Scrubber to clean and dry affected areas effectively. Taking these measures ensures a fresh, clean pantry environment. Conclusion Preventing mold in your pantry requires consistent effort and attention to detail. By keeping the space dry, clean, and well-ventilated, you can eliminate the conditions that allow mold to thrive. Storing food in airtight containers, maintaining optimal humidity and temperature levels, and using tools like Alorair Dehumidifier ensure your pantry remains mold-free. Regular inspections and cleaning routines address potential issues early, giving you peace of mind and a healthier living environment.

← Older Post Newer Post →