There are essential steps that you need to take to dry out a carpet after a flood or tap leak. A wet carpet can breed molds and mildew. This phenomenon happens when the weather is humid. Also, the carpet may have stood in water for more than 48 hours. There are familiar ways you can clean and dry your carpet. You don’t necessarily need to consult a professional.
The availability of many carpet cleaning machines has made this exercise an easy one. But the hardest part is to dry a carpet. A wet carpet gives a foul smell which can last for many months. Therefore, you should seek a quick way of drying your carpet. It is the reason we recommend drying a carpet using a dehumidifier.
How can You Dry a Carpet Using a Dehumidifier?
A dehumidifier is for removing moisture from the air. It processes the wet air and converts moisture into water. Practically, dehumidifier works under two techniques. It has an inlet which draws damp air and an outlet that ejects dry air. The air that is converted into water is then stored in a tank. Once the tank fills up, you need to drain it for the dehumidifier to carry on.
When dry air is ejected, the air becomes dry and more water evaporates from the carpet. The process is continuously repeated until there is no more moisture in the air. A dehumidifier can dry a carpet of 25 sq. Meter room within 12 hours. Therefore, you don’t need to worry about the unavailability of sunlight during the winter season. You can use a dehumidifier to dry your carpet.
The various models of dehumidifiers are based on capacity. Thus, you should select a model based on the size of your room. Here is a guide that takes you through the steps of cleaning a carpet.
1.Assess the Water Damage
Consider the amount of water that has invaded your carpet. You can potentially handle mild water damage on your carpet. Where the damage is more extensive than you can handle, contact a professional from Alorair. They are specialized in dehumidification and moisture control. But if it is damage you can manage, then do it yourself.
2.Remove Wet Items
Remove the furniture and other household items in the room. Other house items may have absorbed a lot of water, and you will need to dry them too. Take them outside to air dry.
3.Pour Liquid Ammonia or Other Carpet Detergent
Pour a cleaning solution and leave it to soak for some minutes. Then, use a garden hose with strong spray nozzle to spray clean water on the carpet. Roll the carpet over and hose the bottom side then rinse thoroughly.
4.Use a Wet Dry Vacuum
Remove excess water from the carpet by use of a wet-dry vacuum. Run the vacuum over the carpet a few times using slow and straight lines. Ensure you empty the gadget when it gets full.
5.Use a Dehumidifier to Dry the Carpet
Having removed most of the water from the carpet, dry out the carpet using a dehumidifier. You will not need to open all windows to let in air as is the case with fans. A dehumidifier works best in a closed room. Place the machine at the center of the room with the wet carpet. Enough room around the gadget allows air to circulate it. You will help the device work efficiently.
Dehumidifiers have significantly made carpet cleaning an easy task. You only need to grasp the above steps and have your carpet clean in one day. With the right model of a dehumidifier, you won’t need to hire an expert to clean your carpet.
Crawl Space & Basement Dehumidifiers
Explore top-rated commercial dehumidifiers for a dry, mold-free basement and crawl space!
